Brake Fluid - Dot4 Brembo
High-quality brake fluid to top off any complete brake job.
Brembo Premium Brake Fluid DOT 4: suitable for all vehicles with ABS. Compared to current regulatory standards, it has a higher boiling point and lower viscosity
Discs, calipers, pads and master cylinders are the four cardinal components of each braking system. However, they cannot play together without the fulcrum of the entire system: the brake fluid.
Typically, its level is checked and toped up only when it has fallen below the minimum mark. However, this does not avoid the risk of “vapour lock”, the formation of vapour bubbles when a brake fluid boils. This problem occurs when the brake fluid absorbs moisture over time, as a result of the porosity of the brake circuit tubes, thereby drastically reducing its boiling point.
“Vapour lock” means, the pedal goes all the way down. As the fluid cannot pass on the pressure, the vapour bubble is just simply compressed in the hydraulic circuit. It is also called a “spongy pedal” with the result of less efficient braking. To avoid this, it is essential to replace the brake fluid within the time limit recommended by the vehicle manufacturer.
However, not all brake fluids have the same properties. With its Premium Brake Fluid range, Brembo is not content to simply meet regulatory standards but rather introduces new concepts.